Bluegrass’ offshore effort was a natural migration given our experience in the nuclear industry, heavy steel cutting of reactor nozzles, marine cutting of crane pintles, and cruise ship crank shafts. We have developed a patented family of saws which are attached to drill rig legs, casings, etc. by diver or ROVs. Robustly engineered with mission sensitive design Bluegrass saws allow easy deployment, predictable cut rates, and minimal dive time.
Our familiy of saws have brought to the offshore market consistant performance resulting in predictable cut rates and substantially reduced vessel and diver time previously devoted to underwater cutting. Our robust design and ease of deployment have resulted in innovative solutions reducing what had been an adventure to routine.
Contractor: WildWell / BTI / Mactech
Offshore Cutter: Bluegrass
Gulf of Mexico
Working from a DP vessel, Bluegrass technicians made multiple cuts on thirty-three inch diameter cans at an average depth of eighty-five feet. Average cut time was one and a half hours per cut with each cut requiring the use of a single wire.
Contractor: WildWell / BTI / Mactech
Offshore Cutter: Bluegrass
Gulf of Mexico
While aboard an offshore platform, Bluegrass technicians competed multiple cuts at an average depth of one hundred twenty five feet. Each cut required the use of a single wire.
Quantiy Dimensions of Cut Type
18 33 inches Conductor
18 22 inches Conductor
6 16 inches Conductor
4 44 inches Conductor
1 52 inches Leg
1 44 inches Pipe Leg
1 35 inches Pipe
Contractor: WildWell / BTI / Mactech
Offshore Cutter: Bluegrass
Gulf of Mexico
Bluegrass technicians made a series of cuts including a twenty inch double wall leg in forty-five minutes and a thirty-three inch well head cut. The diamond wire sawing was completed at an average depth of one hundred thirty feet with each cut requiring the use of a single wire.
Contractor: WildWell / BTI / Mactech
Offshore Cutter: Bluegrass
Gulf of Mexico
Bluegrass offshore technicians have completed over eleven, twenty-four inch well heads cuts at an average depth of eighty-five feet.
|
|
Related projects:
OFFSHORE CUTTING
ANSONIA
ARKANSAS NUCLEAR STATION
SMUD
OFFSHORE CUTTING
OFFSHORE CUTTING
